Month: March 2018

ROCKMAX APEX MIXER 1600

1600 WATT HEAVY DUTY ELECTRIC


INTRODUCTION

Rockmax Moform W is a water based mould release agent. It is formulated from blended emulsion and mineral materials. Product provides water repellent surface achieve clear and easy to remove formworks.

AREA OF USES

Rockmax Moform W can be used for wood and steel formworks.

ADVANTAGES

  • Provide fare face concrete.
  • Easy to use.
  • Economical.
  • Non toxic.
  • Non staining.

    •  

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    Form surfaces must be clean and free from dust, dirt, oil and cement paste.

    APPLICATION

    Apply Rockmax Moform W by brush or roller. Protect the coated area from rainfall. Drying time depend on temperature and humidity.

    CLEANING

    Clean all tools and equipments by clean water.

    PACKAGING

    210 litre steel drum.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX CURE A

    HIGH PERFORMANCE CURING COMPOUND


    INTRODUCTION

    Rockmax Cure A is a high performance paraffin emulsion liquid curing compound. It can provide excellent curing film on concrete surface to prevent fast water evaporation. It is suitable to use with large concrete areas.

    AREA OF USES

    Rockmax Cure A mainly use in all concrete structures with no over coats on surface. It is widely use in large concrete structure and trafficable areas ie runways, highways, bridge desks, retaining walls, water storage areas, concrete towers, precast concrete girders and others.

    ADVANTAGES

    • High eliminate loss of water in concrete.
    • Efficiency hydration reaction.
    • Reduce shrinkage.
    • Economical.
    • Save labor cost.
    • Non flammable.
    • Non toxic.
    • Can be over coat with other trades.

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    Concrete surfaces must be sound and clean.

    APPLICATION

    Apply Rockmax Cure A by spray. Apply immediately after remove formworks.

    CLEANING

    Clean all tools and equipments by clean water.

    PACKAGING

    200 litre drum.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX CURE

    GENERAL PURPOSE CURING COMPOUND


    INTRODUCTION

    Rockmax Cure is liquid curing compound. It is formulated from non toxic chemicals which made a clear film on top of concrete surface when applied. It is provides high water retention and reduce water loss from concrete.

    AREA OF USES

    Rockmax Cure provides a thin film to prevent loss of water in concrete. It is suitable to use in all concrete applications.

    ADVANTAGES

  • Eliminate loss of water in concrete.
  • Efficiency hydration reaction.
  • Economical.
  • Save labor cost.
  • Non flammable.
  • Non toxic.
  • Can be over coat with other trades.

    • APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    Concrete surfaces must be sound and clean.

    APPLICATION

    Apply Rockmax Cure by spray. Apply immediately after remove formworks.

    CLEANING

    Clean all tools and equipments by clean water.

    PACKAGING

    200 litre steel drum.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX MOFORM O

    HIGH PERFORMANCE MOULD RELEASE AGENT


    INTRODUCTION

    Rockmax Moform O is a chemical based mould release agent. It is formulated from selected chemicals and oil solutions. Product provides high performance for finer surface.

    AREA OF USES

    Rockmax Moform W can be used for wood and steel formworks. Especially use in pre cast concrete yard.

    ADVANTAGES

  • Provide finer concrete surface.
  • Easy to use.
  • Economical.
  • Non toxic.
  • Non staining.

    • APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    Form surfaces must be clean and free from dust, dirt, oil and cement paste.

    APPLICATION

    Apply Rockmax Moform O by brush or roller. Protect the coated area from rainfall. Drying time depend on temperature and humidity.

    CLEANING

    Clean all tools and equipments by clean water.

    PACKAGING

    210 litre steel drum.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX MOFORM W

    WATER BASED MOULD RELEASE AGENT


    INTRODUCTION

    Rockmax Moform W is a water based mould release agent. It is formulated from blended emulsion and mineral materials. Product provides water repellent surface achieve clear and easy to remove formworks.

    AREA OF USES

    Rockmax Moform W can be used for wood and steel formworks.

    ADVANTAGES

  • Provide fare face concrete.
  • Easy to use.
  • Economical.
  • Non toxic.
  • Non staining.

    • APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    Form surfaces must be clean and free from dust, dirt, oil and cement paste.

    APPLICATION

    Apply Rockmax Moform W by brush or roller. Protect the coated area from rainfall. Drying time depend on temperature and humidity.

    CLEANING

    Clean all tools and equipments by clean water.

    PACKAGING

    210 litre steel drum.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX LATEX

    ALL PURPOSE BONDING AGENT


    *Click image to enlarge

    INTRODUCTION

    Rockmax Latex is a modified polymer emulsion bonding agent suitable to use in many applications include bonding agent between old and new concrete, new to new, old to old concrete substrate, waterproof render mortar, adhesive bonding grout, improve floor screed properties and improve durability in cement mortar. Rockmax Latex is a dispersion of internally plasticized high polymer resin in water. It is a ready to use and milk white liquid with a viscosity only slightly greater than that of water.

    AREA OF USES

    Rockmax Latex can used to improve bonding, adhesion, durability, watertight and protection to cement mortar. The application areas include mortar, render, plastering, floor screed, bonding construction joints, preventions of cold joints, leveling of floor, application on vertical and horizontal areas, portable waters and etc.

    ADVANTAGES

    • Excellent adhesion.
    • Excellent water resistance.
    • Increase durability
    • High elasticity.
    • Interior or exterior use.
    • Reduce shrinkage.
    • Can apply in portable water.
    • Simply mix with cement, sand and water.
    • Widely use for bonding old to new concrete.
    • Ready to use.
    • Use as bonding for repair materials.

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    The substrates must be sound, clean and free from dust, dirt, oil, laitance and loose particles. Pre wet substrate before application of latex but no standing water.

    APPLICATION

    Bonding agent for old and new concrete

    Mix ratio (by weight)
    Latex : Water : 1 : 1
    Cement : Sand : 1 : 1
    (Note: a suitable sand will generally conform to the requirements of ASTM C144)

    Dry blend cement and sand together. Mix latex and water approximate 1 minute. Add mixed sand and cement into the mixed and continue mix for 1 or 2 minute until homogeneous. The latex slurry should be thick and creamy consistency. Apply latex slurry on the prepared area with minimum 1mm thickness and maximum 3mm thickness.

    The topping must be applied while the bonding slurry is still soft and plastic.

    PACKAGING

    25litre gallon.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX KAZ A

    PLASTICISED EXPANDING GROUT ADMIXTURE


    INTRODUCTION

    Rockmax KAZ A is a ready to use powder form admixture use be an additive for produce cementitious grout mortars and injection grouts. The product provides good reduction water/cement ratio and gaseous expansion results increase strength and durability of cement mortar. The expansive properties is to ensure good interfacial contact.

    AREA OF USES

  • Additive for cementitious grouts
  • Pre-stressed grouts
  • Fill bearing plates
  • Rock anchoring
  • Duct grouts

    • ADVANTAGES

  • Good reduction water/cement ratio.
  • Good expansion result shrinkage compensates.
  • Good adhesion.
  • High flow grout.
  • Economical to produce non shrink grouts.
  • Non metallic and non chloride.

    • PACKAGING

    250gram bag
    or
    25 litre bag.

    ROCKMAX KAZ R

    WATER REDUCING AND RETARDING CONCRETE ADMIXTURE


    INTRODUCTION

    Rockmax KAZ R is a liquid water reducing and retarding concrete admixture designed to use for roller compacted concrete (RCC). Rockmax KAZ R is manufactured under control quality and formulated from blend organic materials.  

    Rockmax KAZ R conforms to ASTM C494 as type B and type D.

    AREA OF USES

    Rockmax KAZ R is used area where long setting time required and hot weather conditions such as:

  • RCC dams
  • Mass concrete structures
  • Mat foundations

    • ADVANTAGES

  • Improve workability of concrete.
  • Water reduction.
  • Extension slump.
  • Increase setting time.
  • Increase density of RCC.
  • Delay setting for compaction RCC.

    • PACKAGING

    210 litre drum.

    ROCKMAX KAZ8000

    SUPERPLASTICISER AND SET RETARDING CONCRETE ADMIXTURE


    INTRODUCTION

    Rockmax KAZ8000 is chloride free, high range water reducing and set retarding concrete admixture. It use especially for high early and ultimate strength in hot climate with extend setting time. It is formulated from modified naphthalene sulfonate and retardant.

    Rockmax KAZ8000 conforms to ASTM C494 as type A, D and G.

    AREA OF USES

  • mass concrete placement
  • hot climates area
  • mat foundation or highways
  • roadways
  • bridges
  • runways
  • power plants
  • dams
  • seaports or any concrete structure which require high quality concrete

    • ADVANTAGES

  • Good improve workability.
  • High early strength.
  • High ultimate strength.
  • Extend working time.
  • Normal setting time.
  • 30% water reduction.
  • Reduce risk of segregation and bleeding.
  • Reduce risk of shrinkage and creep.
  • Dense concrete.
  • Chloride free.

    • PACKAGING

    210 litre drum.

    ROCKMAX KAZ6000

    SUPERPLASTICISER HIGH RANGE WATER REDUCING


    INTRODUCTION

    Rockmax KAZ6000 is chloride free, high range water reducing concrete admixture. Its formulated from selected modified polymers specially designed to dispersing cement particle in concrete mix results in good flowing concrete, high early and ultimate strength.

    Rockmax KAZ6000 conforms to ASTM C494 as type A and type F.

    AREA OF USES

    Rockmax KAZ6000 is used to all type of :

  • concrete structures
  • Large pour concrete
  • precast concrete
  • mass concrete
  • dense reinforcement concrete

    • ADVANTAGES

  • Good improve workability.
  • High early strength.
  • High ultimate strength.
  • Normal setting time.
  • 30% water reduction.
  • Dense concrete.
  • Chloride free.
  • Easy to pour.

    • PACKAGING

    210 litre drum.