ROCKMAX APEX MIXER 1600

1600 WATT HEAVY DUTY ELECTRIC


INTRODUCTION

Rockmax Apex Mixer 1600 is a heavy duty electric mixer. The tool set include with steel paddle for ready to use on site.

AREA OF USES

Rockmax Apex Mixer 1600 can use to mix with varieties of materials such as concrete, cement mortar, tile adhesive, tile grout, paint, waterproofing materials, epoxy, polyurethanes and all construction chemical products.

ADVANTAGES

  • High performance two gears unit.
  • Variable speed control.
  • Safety switch.
  • Easy to handle with.
  •  

    APPLICATION AND INSTALLATION

    HOW TO USE

    Please read the manual attached in the box before start using.

    PRECAUTION

    Keep out of reach of children. Follow safety standard for electrical tools and equipments.

    ROCKMAX PU FOAM M76

    1-PART MULTIPURPOSE POLYURETHANE FOAM


    INTRODUCTION

    Rockmax PU FOAM M76 can be used include with fixing and insulation door and window frames, filling and sealing gaps, joints, cavities, pipe penetrations, wireways, electrical outlets, aircondition pipes. Also to use with any filling that need to close the area for sound or weather proof purpose.

    AREA OF USES

    Rockmax PU Foam M76 can be used include with fixing and insulation door and window frames, filling and sealing gaps, joints, cavities, pipe penetrations, wireways, electrical outlets, air-condition pipes. Also to use with any filling that need to close the area for sound or weather proof purpose.

    ADVANTAGES

    • High expansion rate and foam stability.
    • Excellent adhesion and bonding to many substrates such as PVC, teflon, silicone, concrete, wood, steel, etc.
    • Thermal and acoustical insulation.
    • Easy application.
    • Foam can be cut, trim and shape.
    • Age resistance.
    • Fast setting and curing.
    • Not contain CFC, HCFC.

    APPLICATION AND INSTALLATION

    APPLICATION

    Shake the can well before use (20 times). Screw the adapter on the valve. Hold the can upside down and activated the foam by pressing the valve. Moisturizing the surfaces and the foam improves adhesion and shorten curing time. Fill foam by layer to layer. Wait for each layer to cure until material is hard enough.

    PACKAGING

    500 litre.

    STORAGE

    Storage in shade and dry condition at +15 to +30ºC. Avoid from sunlight, frost, water, moisture and high temperature. The freezing point is approximate -3ºC. Max shortage temperature is +50°C degree. Store in transported vertical position.

    ROCKMAX AQUATECH S

    Silane-Siloxane Solvent Base Water Repellent



    ข้อมูลเบื้องต้น

    Rockmax Aquatech S คือนํ้ายาเคลือบผิวสําเร็จรูป พร้อมใช้งาน สูตรมีตัวทําละลาย ผลิตภัณท์ทํามาจาก โพลีเมอร์ ไซเลน ไซล๊อกเซน โดยจะแทรกซึมผ่านเข้า ไปในเนื้อของพื้นผิวและคงอยูทนทาน ใช้สําหร ับปกป้อง ผิวจากคราบน้ำ ตะไคร่นํ้า ทําให้พื้นผิวสวยงาม ทนทาน สามารถซึมผ่านพื้นผิวที่มีความแน่นได้ เช่น คอนกรีตผิว มัน จะช่วยให้สามารถปกป้องคอนกรีตเสริมเหล็กจากการ กัดกร่อนได้ดี

    ลักษณะการใช้งาน

    Rockmax Aquatech S ใช้สําหรับ เคลือบ ปกป้องผิว คอนกรีตโครง สร้าง เช่น สะพาน ทางด่วน ทางยกระดับ สนามกีฬาปูนเปลือย

    คุณสมบัติ

  • ติดตั้งแล้วจะเคลือบอยู่นาน
  • ปกป้องพื้นผิวจากคราบน้ำ
  • ใช้งานภายนอกได้
  • ยืดอายุคอนกรีต
  • ทนต่อรังสียูวี
  • ทนทานต่อสภาพอากาศ
  • แทรกซึมผ่านพื้นผิวได้ดี
  • ทนทาน
  • สามารถทาบนพื้นที่ที่มีความชื้นได้
  • คงสภาพพื้นผิวสวยงาม
  • ใช้งานง่าน ใช้ได้ทันที
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    พื้นผิวคอนกรีตต้องสะอาด ไม่มีฝุ่น ผงซีเมนต์ นํ้ามัน นํ้ายาทาแบบหลงเหลืออยู่ คอนกรีตหรือปูนฉาบใหม่ต ้อง รออย่างน้อย 21 ว ันก่อนทำการทา ปูนซ่อมแซมผิวใหม่ ต้องรออย่างน้อย 5 วันก่อนทำการทา

    วิธีการใช้งาน

    ทาน้ำยาด้วยแปรงหรือลูกกลิ้ง รอให้แห้ง 24 ชั่วโมงก็สามารถ ใช้งานได้ ในกรณีที่พื้นผิวมีความพรุนมากให้ทาซ้ำอีกครั้ง โดยรอ 2 ชั่วโมงหลังจากทาเที่ยวแรก

    การบ่ม

    ป้องกันพื้นผิวที่ทาเสร็จแล้วจากน้ำและฝนหลังจากทา 24 ชั่วโมง โดยการบ่มตัวจะสิ้นสุดที่ 7 วัน

    ขนาดบรรจุ

    5 ลิตร ,
    25 ลิตร

    วิธีเก็บรักษา

    เก็บรักษาไว้ในทีม ไม่มีแดด ความร้อนสูง หรือความชื้น ควรเก็บรักษาไว ้ที่ อุณหภูมิประมาณ 10 ถึง 40 องศาเซลเซียส

    ROCKMAX AQUATECH W

    Silane-Siloxane Water Based Water Repellent


    INTRODUCTION

    Rockmax Aquatech W is a ready to use, water based, liquid applied, water repellent. It’s formulated from silane-siloxane polymer. The cured material act like sealer to the substrates and provides durability, water repellent and protect the appearance of surfaces. The material penetrates into the surface, forming a long lasting water repellent treatment that retards the penetration of these contaminants.

    AREA OF USES

    Rockmax Aquatech W can be used to many substrates include exposed concrete, cement mortars, masonries, bricks, tiles, natural stones, lime stones, slate, terracotta, clay tiles. It can be used also for re-waterproofing for finished tiles.

    ADVANTAGES

  • Excellent water repellency.
  • Non-staining.
  • No film on surface.
  • UV resistance.
  • Excellent weather resistance.
  • Good penetration.
  • Non-toxic, water based.
  • Not change the surface appearance.
  • Long term effective.
  • Keep beautiful surfaces.
  • Easy to apply & ready to use.
  •  

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    The substrate must be dry, sound, clean and free from oil, grease, mould oil, curing compound, dust, loose particles and cement paste. No standing water on the surfaces. New concrete should be allowed to cure at minimum 21 days old. The new repair mortar must be waited at minimum 5 days before application.

    APPLICATION

    Stir the material until homogenous by electric low speed drill mixer. Apply Rockmax Aquatech W by roller or brush. Apply with a uniform saturation. Surfaces should remain wet for a few minutes. Water and oil repellency will start to develop within 24 hours and completely cure in 7 days. In case of porous substrates, we recommended to apply the second coat within 4 hours after first application

    PACKAGING

    5 litre.
    25 litre.
    200 litre.

    STORAGE

    Storage in shade and dry condition at 5-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX PUTTY

    ACRYLIC WALL PUTTY


    INTRODUCTION

    Rockmax Putty is a waterborne, acrylic putty for interior and exterior use. It has excellent resistance to adverse weather conditions, damp, alkalinity and is suitable for coating of plaster, concrete, cement boards, plaster boards, gypsum boards. The material is smooth and fine surface, Easy to work and quick drying without cracks.

    AREA OF USES

    Rockmax Putty can be used to fill the holes, voids, joints, cracks, seams for concrete, gypsum boards, cement boards, plaster boards, woods, brick works, block works, mortars, tiles.

    ADVANTAGES

  • Interior & exterior use.
  • Good adhesion.
  • Ready to use.
  • Smooth finished.
  • Quick drying.
  • Not easy to cracks.
  • Can paint it over.
  •  

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    The substrate must be sound, clean free from oil, grease, mould oil, dust, and loose particles and cement paste.

    APPLICATION

    Apply material by spatula or steel trowel.

    PACKAGING

    5 kg.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.

    ROCKMAX PLASTECH

    Cement Mortar Admixure For Rendering


    INTRODUCTION

    Rockmax Plastech is a liquid type admixture for cement mortar mixing. It can be used for rendering, plastering and block/brick laying works. The mix provides high quality mortar results in excellent bo nding, reduce cracks, reduce amount of water, enhance workability, easy to work. The material is conform to BS 4887.

    AREA OF USES

    Rockmax Plastech can use by mix with water, cement and sand to provide high quality cement mortar for rendering, plastering, block works, brick works.

    ADVANTAGES

  • Improve workability.
  • Improve cohesion.
  • Smooth fine surface mortar.
  • Provide high quality mix.
  • Reduce shrinkage & cracking.
  • Reduce bleeding.
  •  

    APPLICATION AND INSTALLATION

    DOSAGE

    0.1 – 0.2% by weight of cement.

    MIXING

    Mix admixture follow above mix ratio with clean water before mix with sand and cement.

    PACKAGING

    5 litre,
    25 litre,
    200 litre.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature. The freezing point is approximate -3ºC.

    ROCKMAX ADMIX CM

    Waterproofing Admixure For Concrete & Mortar


    INTRODUCTION

    Rockmax Admix CM is a liquid admixture for waterproofing and plasticizer for concrete and cement mortar mix. Rockmax Admix CM conforms to ASTM C494 type A.

    AREA OF USES

    Rockmax Admix CM can be used to waterproofing concrete structures such as watertanks, swimming pools, toilets, kitchens, ground slabs, tunnels, culverts and can use for waterproofing cement mortar rendering.

    ADVANTAGES

  • Improve workability.
  • Increase strength.
  • Water-tightness.
  • Reduce shrinkage and cracks.
  • Non-toxic, can use on drinking tank.
  • Easy to mix.
  •  

    APPLICATION AND INSTALLATION

    DOSAGE

    0.4– 0.5% by weight of cement. Must be dispensed with clean water. We recommended that the trial concrete mix must be proceeding on site with actual materials. To determine the best optimum dosage, the result such as compressive strength, slump, setting time and etc should be analyzed carefully. For more information and assistance please contact Rockmax Technical Services Team.

    PACKAGING

    5 litre,
    25 litre,
    200 litre.

    STORAGE

    Storage in shade and dry condition at 10-40ºC. Avoid from sunlight, frost, water, moisture and high temperature. The freezing point is approximate -3ºC.

    LOXET 600

    ALKALI FREE LIQUID ACCLERATOR


    INTRODUCTION

    Loxet 600 is an alkali free liquid set accelerator admixture. It’s especially design for shotcrete application.

    AREA OF USES

    Loxet 600 can be used for sprayable concrete application including with tunneling, rock support, soil stabilization, mining support, pool constructions.

    ADVANTAGES

  • Fast setting of mixed.
  • Alkali free (Non Toxic).
  • High early strength.
  • Excellent long term strength.
  • Durability concrete.
  • Chloride free,
  • No corrosion to reinforcing steel.
  • Liquid type easy for application.
  • Low dust production during application.
  • Low amount of rebound loss.
  • Los viscosity.
  •  

    APPLICATION AND INSTALLATION

    DOSAGE

    The consumption of Loxet 600 depends on many factors such as temperature, type of aggregates, cement content, age of cement, thickness per layer, method of spraying, equipment, accurate of nozzle, setting time, design strength, etc. We recommended the dosage of Loxet 600 in between 3% to 10%. The optimum dosage must be determined by trial on site with control conditions. Overdosing (>10%) may result in decrease of ultimate strength.

    COMPATIBILITY

    Loxet 600 is compatible with all type of ordinary portland cement. We recommended to used fresh cement than aged cement as there may have some effect on setting time. Loxet 600 is compatible with all Rockmax admixture products. Do not mix Loxet 600 with any type of accelerator produced by other manufacturer.

    APPLICATION

    Loxet 600 must be added in the nozzle and injected by pump with adjustable pressure type (No filter on nozzle head). We strongly advise that w/c ratio must be lower than 0.45 and should be use conjunction with our superplasticiser admixture for improve smooth pumping.

    CLEANING

    All equipment, pump, hose, nozzle, etc must be truly clean with plenty of water.

    PACKAGING

    200 Litre PE type drum.
    Do not store material in steel containers. The container must be sealed to avoid evaporation

    ROCKMAX RIBLATH

    3/8” GALVANISED STEEL LATH


    INTRODUCTION

    Rockmax Riblath is the most rigid of all metal laths. With full 3/8” ribs longitudinally spaced at 4” apart. This lath can be used both vertical and horizontal applications. It is designed to provide durable, effective for plastering and rendering work at job site. It is manufactured from pre-galvanised steel or stainless steel as per request.

    AREA OF USES

    Rockmax Riblath is ideal for refurbishing damaged or aged masonry walls, when a key for rendering is not certain due to disintegration or softening of the wall face. It can be use as the permanent construction joint for concrete slab if necessary designed. It can be use for internal or external applications.

    ADVANTAGES

  • Easy handling and installation.
  • Fast track project and saving construction time.
  • Save labor cost.
  • Save cost of repair job.
  • APPLICATION AND INSTALLATION

    Fixing of Rib lath Sheets

    Rib lath is fixed so that the tip of the rib is put against the supporting background. The rib of the sheet should run at right angles to any supports. Make sure that sheets are superposed by a minimum of 50mm end to end and by 25mm width ways and that the ribs are nestled together.

    Wood Support

    Rib lath is fixed at each rib to wood supports using plasterers’ nails or staples. Make sure that compatible corrosion resistant fixings are used, for example, please don’t use galvanized fixings for stainless steel.

    Metal or Steel Support

    Rib lath is fixed at each rib to metal support using 1.63mm galvanized or stainless steel tying wire. When joining rib lath sheets overlap the edge ribs and tie the edges with 1.22mm tying wire at 150mm centers.

    Solid Background

    Rib lath can be fixed to a solid background using a suitable fixing which holds the ribs firmly against the background. Where sheets are installed perpendicularly, fixings should be positioned through all ribs at 600mm centers to make sure there have enough stability. Movement joints should be provided at maximum 50mm center (vertically and horizontally) for render finishes.

    STORAGE

    Storage in shade and dry condition, Avoid from frost, water, moisture and high temperature.

    ROCKMAX SUPERRIB

    FORM RIB FOR CONSTRUCTION JOINT, PERMANENT


    INTRODUCTION

    Rockmax Superrib is a galvanized permanent shuttering system with a unique design incorporating mesh and roll formed ribs. This system retains poured concrete achieves a significant reduction in the pressure of concrete normally associated with conventional formwork and provide mechanical keys for construction joints.

    It can be placed before reinforcing rods which are installed after by piercing them through the mesh are in the rib. This light and versatile product can be cut and bent to shape. Therefore suiting may applications and can be fitted in less time than traditional formwork. The advantage of Superrib are that no stripping or preparation work the joint is necessary before bonding to any adjacent pour. Also if reinforcement is in place it will allow continuation of fixing without a break.

    AREA OF USES

    Formwork construction joints, the formwork remain permanently placed the pored concrete and the surface after casting which requires no bonding medium for the next pour. The quality of the bonding between new concrete and old is strong and durable than normal shuttering method, without any sort of damage on concrete. Superrib is using in many large construction structures, sewerage plants, storage tanks dry docks, foundation, and bridge decks are some among them. The super-rib will be permanently places after casting that reduces the cost of shutter removal, only support removal is required.

    ADVANTAGES

  • Lightweight Unlike heavy timber, It is extremely light and is easily transported to sites.
  • Permanent, Its forms a permanent shuttering for construction joints, unlike temporary timber formwork which must be removed after concrete is casted.
  • Convenient Unique “fingers” in Superrib retain the concrete that is poured, with the resulting surface, requiring no special bonding preparation for the next pour.
  • Greater Strength and Uniformity, without the need to chisel, hack or roughen the poured concrete by mechanical means, there is less likelihood of inducing cracks which could weaken the bonding strength and joints.
  • Flexible, Superrib is easily bent and cut into required shapes, making it highly suitable for lowkey or toggle joints. When used before rod reinforcement, rods can later be positioned by simply piercing through the mesh.
  • Time Saving, Superrib eliminates the stripping, cleaning, hacking and oiling normally associated with plywood formwork, as well as unnecessary drilling and carpentry works.
  • Reduce Presssure, Superrib was designed helps to reduce the water pressures build-up common with wet cement, so less support is needed.
  • APPLICATION AND INSTALLATION

    STANDARD

    BS 6399 part 1, 1984
    ASTM A653/A653M

    CONCRETE STABILITY

    The application of the Superrib is suitable in most concrete mixes with slump between 70mm to 180mm When the application is with concrete slump of 180mm and over, a little cementations liquid is expected to seep/leak through the openness of the “keying region” of the Superrib during the initial stage of the concrete pour. However this will not weaken the strength of the concrete core. In this application no vibrator is used.

    POURING CONCRETE

    Concrete shall not be poured directly against the Superrib. The concrete shall be poured at about 500mm distance away from the Superrib and let it flow towards the Rib. In general, the pour (or initial pour) of concrete should be effected against the ribbed side of the Rib. Excess grout should be removed. Taking care not to disturb the fresh concrete Superrib face while removing any overspill and grout build up on the walings.

    PACKAGING

    10 Sheet per bundle.

    STORAGE

    Storage in shade and dry condition Avoid from frost, water, moisture and high temperature.