POLYGARD V3

ัสดุกันซึมประเภทโพลียูรีเทน


*คลิกเพื่อดูภาพขยาย

ข้อมูลเบื้องต้น

Rockmax Polygard V3 เป็นวัสดุกันซึมประเภทโพลียูรีเทนพร้อมใช้งานโดยมีส่วนผสมเดียว ตัววัสดุจะให้ความยืดหยุ่น สูงมาก มีค่าการยึดเกาะกับพื้นผิวดีเยี่ยม สามารถยืดและหดตัวตามพื้นผิวได้ ปกปิดรอยแตกร้าว และมีคุณสมบัติกันซึมสูง พร้อมทั้งมีอายุการใช้งานที่ยาวนาน สามารถติดตั้งได้ทั้งแบบไหลตัวได้เองและแบบทา

ลักษณะการใช้งาน

  • กันซึมสำหรับหลังคาคอนกรีต
  • กันซึมห้องน้ำ
  • กันซึมสำหรับระเบียง
  • กันซึมสำหรับสระว่ายน้ำ
  • กันซึมสำหรับชั้นใต้ดิน
  • กันซึมสำหรับกำแพงกันดิน
  • คุณสมบัติ

  • มีความยืดหยุ่นสูง
  • ยึดเกาะกับพื้นผิวดีเยี่ยม
  • หนึ่งส่วนผสมพร้อมใช้งาน
  • ให้ความคงทนอยู่ได้นาน
  • ไม่มีรอยต่อ
  • ทนต่อรากไม้
  • สามารถทาได้แม้พื้นผิวไม่เรียบ
  • วิธีการติดตั้งและใช้งาน


    การเตรียมพื้นผิว

    พื้นผิวคอนกรีตต้องสะอาด ไม่มีฝุ่น ผงซีเมนต์ น้ำมัน น้ำยาทาแบบหลงเหลืออยู่ พื้นผิวต้องแห้งสนิท ตรวจสอบสภาพพื้นผิว ต้องไม่มีรอยแตกร้าว หรือผิวคอนกรีตที่หลุดร่อน ทำการซ่อมแซมพื้นผิวที่เสียหาย ก่อนการทาวัสดุ รอยต่อต่างๆ บนพื้นผิว ต้องทําการอุดรอยต่อด้วยยาแนวประเภทโพลียูรีเทน

    วิธีการผสม

    การติดตั้งด้วยการทา
    ก่อนการติดตั้งต้องทําการกวนเนื้อวัสดุให้เข้ากันด้วยเครื่องกวนไฟฟ้า โดยทำการกวนประมาณ 1 ถึง 2 นาที ทำการทา ลงบนพื้นผิวด้วยแปรงหรือลูกกลิ้ง ทาอย่างน้อย 2 เที่ยว รอให้แห้งระหว่างเที่ยวประมาณ 24 ชั่วโมง

    การติดตั้งด้วยเครื่องพ่น
    สำหรับการพ่นต้องใช้เครื่องพ่นชนิด airless โดยอัตราการใช้จะขึ้นอยู่กับผู้ควบคุมเครื่องและอุปกรณ์ควรติดตั้งโดยผู้มี ประสบการณ์เท่านั้น

    การบ่ม

    ตัววัสดุจะทําการบ่มด้วยตัวเองเป็นเวลา 7 วัน

    ขนาดบรรจุ

    18 กิโลกรัม / ถัง

    POLYLASTIC SA1

    100% Spray Applied Polyurea For Waterproof & Protective Coating


    INTRODUCTION

    Rockmax Polylastic SA1 is a two component, 100% solid pure elastomeric polyurea coating. The cured membrane provides excellent flexible, durable, chemical resistance and corrosion protection. This material has been designed for machine application only.

    AREA OF USES

    Rockmax Polylastic SA1 can be used to waterproofing and protective coating for concrete structures such as roof decks, watertanks, basements, bridge decks, steel tanks, steel pipes., powe r plants, oil refineries, wood structures.

    ADVANTAGES

  • Excellent elongation and tensile strength.
  • Excellent chemical resistance.
  • Excellent oil resistance.
  • Excellent corrosion protection.
  • Very good bonding to substrates.
  • Fast reactive and cured time.
  • 100% solids (zero VOCs).
  • UV resistance.
  • Services temperature from -30°C to +120°C degree.
  • APPLICATION AND INSTALLATION

    PREPARATION

    Concrete substrate must be sound, clean free from oil, grease, mould oil, dust, and loose particles and cement paste. New concrete must be at minimum 28 days old. Do not apply when ambient temperature is below -10ºC degree. Ensure the surface is dry and free from standing water. Investigate void, honeycomb, or crack on concrete substrate. All damaged must be repair prior to application.

    Equipment

    This product may only be use by trained experience applicators/users. The equipment must be use is two part hot spray high pressure (>1500psi) machine only which can stable the hose the temperature from +60° C to +70°C. Pre-heat the equipment shall be +70 °C to +75 °C. Physical properties will be enhance when spray at more than 2500psi.

    MIXING

    Dose and mix with suitable two-part hot spray equipment. Both components must be heated up to between +60°C and +70°C. The accuracy of mixing and dosage must be controlled regularly with the equipment. Stir each part before load in to the equipment.

    APPLICATION

    The material can be sprayed over a broad range of substrate and ambient temperature. The limitation are in the ability of equipment to provide adequate pressure and stable temperature. Spray the material in multi direction (nort-south/east-west). Ensure the uniform of thickness.

    PACKAGING

    Part A: 200Litre drum
    Part B: 200Litre drum

    STORAGE

    Storage in shade and dry condition. Avoid from frost, water, UV, moisture and high temperature. Store from +10°C to +35 °C.

    MESH

    FIBERGLASS MESH FOR WATERPROOFING APPLICATION


    INTRODUCTION

    Rockmax Mesh is a fiberglass mesh use in waterproofing application. The mesh increases reinforced, tensile, adhesion and puncture resistance to waterproofing system.

    AREA OF USES

    Rockmax Mesh can be used with
    variety of waterproofing
    materials such as Acrylic,
    Ceramic, Polyurethane, Cement flexible, Liquid Modified Bitumen Waterproofing.

    ADVANTAGES

  • Increase Puncture resistance.
  • Increase adhesion to substrate.
  • Good bonding between waterproofing material layers.
  • TECHNICAL PROPERTIES

    Color: White
    Width x Length: 1 meter x 100 meter
    Thickness: approx 0.22mm

    PACKAGING

    Roll: 1meter width x 100 meter length.

    STORAGE

    Storage in shade and dry condition at 10-30ºC. Avoid from sunlight, UV, frost, water, moisture and high temperature.

    EPOGARD W1

    Solvent Free Epoxy Coating For Drinking Water Retaining Structures


    INTRODUCTION

    Rockmax Epogard W1 is a two component, solvent free epoxy coating or lining. The cured material provides hard, gloss, smooth and watertight to concrete surfaces with and including abrasion and chemical resistance. It is suitable with potable or drinking water tank. The cured material is non-toxic.

    AREA OF USES

    Rockmax Epogard W1 is used for coating and lining concrete or steel surfaces such as waterproofing the internal of drinking water retaining tanks, waste water tanks, sewages, tunnels, reservoirs, retaining walls.

    ADVANTAGES

  • Excellent chemical resistance.
  • Excellent abrasion resistance.
  • Hard wearing surface.
  • Corrosion resistance.
  • Waterproof.
  • Food grade and hygienic.
  • Solvent free and non-toxic.
  • Protect moisture movement.
  • Easy for cleaning.
  • Good adhesion to concrete.
  •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from oil, grease, wax, cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm 2 and minimum tensile strength (pull off) at 1.5 N/mm 2 . The moisture content in concrete must be lower than 6%. The substrate should not have a relative humidity more than 85% at installation period. Total enclosed grinding, high water pressure jet, or scarifying must be employed followed by vacuuming. All holes and voids must be repaired prior to installation. Seal the surface with moisture barrier or modified epoxy cement in case of surface subject to rising damp or moisture movement. Please consult Rockmax for more information.

    PRIMING

    Apply Rockmax Epogard P by roller at one coat at approximate coverage rate 0.2 kg/m 2 . Allow the prime coat to dry approximate 4 hours. The difference type of primers must be considered according to substrate conditions.

    MIXING

    Stir base and hardener component separately approximate 10 second. Pour part A and part B together in the bucket and continue mixing for 3 minute until homogeneous. Avoid whipping air into the material. It is recommended that only full units to be used, that all components are thoroughly mixed. We do not recommend using partial kits and reduce or dilute materials.

    APPLICATION

    Applied Rockmax Epogard W1 by roller or stiff nylon type brush. Allow the first coat dry at approximate 5-6 hours (30ºC) and the second coat must be applied not more than 48 hours after the first coat application. When finished the application protect the coating from water.

    PACKAGING

    24kg set (A+B). Part A: 18kg and Part B: 6kg.

    STORAGE

    Storage in shade and dry condition. Avoid from frost, water, UV, moisture and high temperature.

    EPOGARD T

    ระบบกันซึมชนิดอีพ๊อกซีทาร์ ทนทานสารเคมีกัดกร่อน


    ข้อมูลเบื้องต้น

    Rockmax Epogard T คือระบบกันซึมชนิดอีพ๊อกซีกับโคลทาร์ สองส่วนผสม เมื่อวัสดุบ่มตัวแล้วจะสามารถใช้ในงานกันซึม ที่ต้องการ ทนทานการกัดกร่อนจากสารเคมี ทนทารการขัดถู เสียดสี และทำให้คอนกรีตมีอายุคงทนยาวนาน โดยลักษณะ พิเศษคือ ทนทานสารเคมีได้สูง เช่น กรด น้ำเกลือ น้ำทะเล น้ำที่มีส่วนผสมคลอไรด์ น้ำยาซ ักผ้า ด่าง ตัวทำละลาย

    ลักษณะการใช้งาน

    Rockmax Epogard T ใช้เป็น ระบบกันซึมและทนทานสารเคมีกัดกร่อน เช่น งานถังเก็บน้ำ งานถังบำบัด น้ำเสีย ท่อระบายน้ำเสีย อุโมงค์ ผนังกันน้ำ ถังเก็บสารเคมี(บาง ชนิด) ถังหล่อเย็น

    คุณสมบัติ

  • ทนทานสารเคมีกัดกร่อน
  • ทนทานการขูดขีดเสียดสี
  • สามารถป้องกันน้ำทะเลกัดกร่อนได้
  • ผิวหน้าแข็ง
  • ป้องกันการกัดกร่อนผิวคอนกรีต
  • กันซึมได้ดีเยี่ยม
  • ป้องกันการซึมผ่านของไอน้ำ
  • ยึดเกาะดีเยี่ยมกับผิวคอนกรีต
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    พื้นผิวที่พร้อมจะทำระบบกันซึมต้องแห้งสนิท สะอาด พื้นผิวปราศจากฝุ่น ผงซีเมนต์ น้ำมัน น้ำยาทาแบบ ตรวจสอบความ สมบูรณ์ของผิวคอนกรีต ต้องไม่มีรูโพรงหรือรอยร้าวใดๆ ถ้าม ีต้องทําการแก้ไขให้อยู่ในสภาพดี ก่อนการติดตั้งระบบกันซึม คอนกรีตต้องมีอายุอย่างน้อย 28 วัน และมีค่ากำลังอัดไม่น้อยกว่า 25 N/mm2 มีค่าแรงดึงไม่น้อยกว่า 1.5 N/mm2 ค่าความชื้นในคอนกรีตไม่เก ิน 6% และค่าความชื้นสัมพัทธ์ 85% RH การทำความสะอาดพื้นผิวด้วยเครื่องพ่นน้ำแรงดันสูง หรือเครื่องเจียผิวเพื่อเพิ่มการยึดเกาะ ในกรณีที่พื้นผิวอาจมีแรงดันจากน้ำด้านล่าง จำเป็นต้องทําการป้องกันก่อนการติดตั้ง วัสดุ

    วิธีการผสม

    ทำการตรวจสอบเครื่องมือและอุปกรณ์ที่จะใช้ผสม มีความพร้อมที่จะใช้งาน เครื่องผสมต้องเป็นส่วนผสมที่มีอัตราความเร็ว รอบประมาณ 400-500 rpm กวนสารแต่ละส่วนด้วยสว่านกวนประมาณ 1 นาที เทแต่ละส่วนลงถังที่จะกวน กวนเป็นเวลา 3 ถึง 4 นาที จนวัสดุเข้ากันได้ดี จำเป็นต้องใช้สว่านกวนเท่านั้น

    วิธีการใช้งาน

    ใช้แปรงพลาสติกหรือลูกกลิ้งในการทา โดยทาลงบนพื้นผิวที่เตรียมไว้ ทาชั้นแรกและรอไว้ 12 ชั่วโมงก่อนทาชั้นที่สอง ไม่ควรทิ้งไว้เกิน 48 ชั่วโมงหลังจากทารอบแรก หลังจากทาเสร็จให้ปกป้องผิวจากน้ำหรือน้ำฝน รอให้บ่มตัว 7 วันก่อนการ ทดสอบน้ำหรือปล่อยน้ำ

    ขนาดบรรจุ

    24.5 กิโลกรัม (A+B)
    ส่วน A: 21 กิโลกรัม และส่วน B: 3.5 กิโลกรัม

    MAXSHIELD 400S

    APP TORCH ON WATERPROOF ING SHEET MEMBRANE
    4mm THICKNESS WITH SAND OR SLATE FINISHED


    INTRODUCTION

    Maxshield 400S is an atatic polypropylene plastomeric (APP) modified bitumen waterproof sheet membrane and can be used for exposed surface. It is formulated from high grade modified bitumen with selected elastic polymer and reinforced with non woven polyester reinforcement. The membrane provides good elongation, high puncture resistance and good mechanical characteristic. The membrane top surface finished with special grade material such as sand or slate which can be exposed to the environmental with no require protections.

    AREA OF USES

  • Basements.
  • Tunnels.
  • Retaining walls.
  • Subways.
  • Below grade structures.
  • Balconies.
  • Roof.
  • Exposed roof desks.
  • Others.
  • ADVANTAGES

  • Good flexibility.
  • Good elongation.
  • Good elastic recovery.
  • High puncture resistance.
  • Good mechanical characteristic.
  • Will not decay.
  • Prefabricated membrane under     control quality.
  • Easy to torch on.
  • Widely use.
  •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete substrate must be at least 28 days old. Substrate must be sound, smooth, clean, dry and free from loose materials, oil, grease or any other contaminants. In case of substrate has moisture on surface use flame torch to dry up surface prior to apply primer.

    PRIMING

    Apply Maxshield Primer on prepared substrate at approximate coverage rate 5m2 per litre and allow to dry.

    APPLICATION

    Maxshield 400S should be install using gas torch. Slowly unrolled the membrane and flame torch the membrane until the bottom surface melt but do not over heat. Side overlap must be minimum 150mm. roll overlap joint must be minimum 100mm. Lap joint should be sealed by torch. All expansion joints, movement joints and all joints must be followed and allowed follow structural design. Other joints and end points must be allowed according to specifications. The membrane must be protected immediately after installation.

    Maxshield 400S must be installed by experiences, trained and approved applicators. Installation shall be strictly in accordance with manufacture method statement instruction.

    PACKAGING

    Roll size: 1meter x 10meter.
    Roll weight: approx 35kg.

    MAXSHIELD 300S

    APP TORCH ON WATERPROOF ING SHEET MEMBRANE


    INTRODUCTION

    Maxshield 300S is an atatic polypropylene plastomeric (APP) modified bitumen waterproof sheet membrane. It is formulated from high grade modified bitumen with selected elastic polymer and reinforced with non woven polyester reinforcement. The membrane provides good elongation, high puncture resistance and good mechanical characteristic. The membrane is top coated by sand or polyethylene (PE) and bottom surface protected by heat sensitive film.

    AREA OF USES

  • Basements.
  • Tunnels.
  • Retaining walls.
  • Subways.
  • Below grade structures.
  • Balconies.
  • Roof.
  • Others.
  • ADVANTAGES

  • Good flexibility.
  • Good elongation.
  • Good elastic recovery.
  • High puncture resistance.
  • Good mechanical characteristic.
  • Will not decay.
  • Prefabricated membrane under control quality.
  • Easy to torch on.
  •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete substrate must be at least 28 days old. Substrate must be sound, smooth, clean, dry and free from loose materials, oil, grease or any other contaminants. In case of substrate has moisture on surface use flame torch to dry up surface prior to apply primer.

    PRIMING

    Apply Maxshield Primer on prepared substrate at approximate coverage rate 5m2 per litre and allow to dry.

    APPLICATION

    Maxshield 300S should be install using gas torch. Slowly unrolled the membrane and flame torch the membrane until the bottom surface melt but do not over heat. Side overlap must be minimum 150mm. roll overlap joint must be minimum 100mm. Lap joint should be sealed by torch. All expansion joints, movement joints and all joints must be followed and allowed follow structural design. Other joints and end points must be allowed according to specifications. The membrane must be protected immediately after installation.

    Maxshield 300S must be installed by experiences, trained and approved applicators. Installation shall be strictly in accordance with manufacture method statement instruction.

    PACKAGING

    Roll size: 1meter x 10meter.
    Roll weight: approx 30kg.

    MAXSHIELD 150W

    SBS SELF ADHESIVE SHEET MEMBRANE


    INTRODUCTION

    Maxshield 150W is a cold applied self adhesive bituminous membranes. It is manufactured and formulated from modified SBS bitumen and high performance adhesive layer. This selected materials made very easy to installation. It is supplied in rolls 1meter width x 15meter long and 1.5mm thickness.

    AREA OF USES

  • Foundations.
  • Below grade structures.
  • Retaining walls.
  • Balcony.
  • Roof desks.
  • Flat roofs.
  • Planter boxes.
  • All concrete structures.
  • ADVANTAGES

  • Excellent adhesion to concrete.
  • Good flexibility.
  • Fast and easy installation.
  • Watertight.
  • Uniform thickness.
  • Resistance to acids and alkalis.
  • Nominal thickness 1.5mm.
  • APPLICATION AND INSTALLATION

    PREPARATION

    Concrete substrate must be sound, smooth, clean, dry and free from loose materials, oil, grease or any other contaminants. In case of substrate has moisture on surface use flame torch to dry up surface prior to apply primer.

    PRIMING

    Apply Maxshield Primer on prepared substrate at approximate coverage rate 5m2 per litre and allow to dry.

    APPLICATION

    Maxshield 150W should be applied from lowest point. All joints, angles and end points must be overlap at minimum 75mm. Internal and external corners should be reinforced with 300mm membrane strip. End laps should be sealed. Ensure the membrane is perfectly stick and adhere with concrete substrate and no air pockets. It is recommended to protect the membrane by protection boards immediately. Do not exposed the membrane to direct UV for long period. Maxshield 150W must be installed by experiences, trained and approved applicators.

    PACKAGING

    Roll size: 1meter x 15meter.
    Roll weight: approx 25kg.

    ROCKMAX WATERPLUG

    ซีเมนต์อุดน้ำรั่ว


    ข้อมูลเบื้องต้น

    Rockmax Waterplug คือ ซีเมนต์เซ็ตตัวเร็ว ใช้ในงานหยุดน้ำที่รั่วซึม เข้ามาในผนังโครงสร้างคอนกรีต รอยต่อคอนกรีต หรอฐานรากคอนกรีต

    ลักษณะการใช้งาน

  • หยุดน้ำรั่วใต้ดิน
  • หยุดน้ำรั่วในงานทั่วไป
  • หยุดน้ำรั่วในสระว่ายน้ำ
  • หยุดน้ำรั่วต่างๆ
  • คุณสมบัติ

  • เซ็ตตัวเร็ว
  • ใช้งานง่าย
  • ยึดเกาะดีเยี่ยม
  • ไม่กัดกร่อน
  • ไม่มีส่วนผสมของคลอไรด์
  • บรรจุภัณท์ขนาดเล็กง่ายต่อการใช้งาน
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    ทำความสะอาดพื้นผิวให้ดีก่อนการใช้งาน

    วิธีการผสม

    ผสมวัสดุกับน้ำสะอาด ประมาณ น้ำ 1 ส่วนกับวัสดุ 5 ส่วนตามน้ำหนัก โดยตัววัสดุจะมีความหมาดในตัว

    วิธีการใช้งาน

    ทำการปั้นวัสดุที่ผสมขนาดพอดีมือ น้ำที่รั่วจะต้องเป็นการรั่วแบบไม่มีแรงงดันมาก ถ้ามีแรงดันน้ำมากจำเป็นต้องใช้วิธีการยิงโฟม (Rockmax PU100) ใช้มืออุดไปตามรอยรั่วที่น้ำไหล ค้างไว้ประมาณ 2-3 นาที หลังจากนั้นปล่อยมือและตรวจสอบว่าน้ำหยุดหรือไม่ ถ้าไม่ให้รื้อปูนทิ้งและเริ่มใหม่ ถ้าน้ำหยุดให้ทำการตกแต่งผิวส่วนเกินออก

    ขนาดบรรจุ

    5 กิโลกรัม

    ROCKMAX ROOFGARD

    ระบบกันซึมชนิดบิทูเมนแบบทา


    ข้อมูลเบื้องต้น

    Rockmax Roofgard คือระบบกันซึมชนิดบิทูเมนแบบหนึ่งส่วนใช้ทา ใช้เป็นวัสดุกันซึมหลังคาหรือใต้ดินได้ สามารถป้องกันการซ ึมผ่านของไอน้ำได้ดี สามารถทาได้หลากหลาย เช่น คอนกรีต กระเบื้องหลังคา เมทัลชีท

    ลักษณะการใช้งาน

  • หลังคา รางน้ำ
  • ระเบียง
  • กันซึมชั้นใต้ดิน
  • ใช้ป้องกันการซึมผ่านไอน้ำ
  • กำแพงกันดิน
  • คุณสมบัติ

  • ยืดหยุ่นตัวสูง
  • ปกปิดผิวเนื่องจากรอยร้าว
  • ยึดเกาะพื้นผิวดีเยี่ยม
  • ใช้งานง่าย
  • ไม่มีรอยต่อ
  • ปกป้องผิวเหล็กจากสนิม
  • ป้องกันการกัดกร่อน
  • สามารถทาบนปูนเก่าได้
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    พื้นผิวที่พร้อมจะทำระบบกันซึมต้องแห้งสนิท สะอาด พื้นผิวปราศจากฝุ่น ผงซีเมนต์ น้ำมัน น้ำยาทาแบบ ตรวจสอบความ สมบูรณ์ของผิวคอนกรีต ต้องไม่มีรูโพรงหรือรอยร้าวใดๆ ถ้ามีต้องทําการแก้ไขให้อยู่ ในสภาพดีก่อนการติดตั้งระบบกันซึม

    วัสดุรองพื้น

    ทำการเจือจางด้วยน้ำสะอาด 1 ต่อ 1 (โดยปริมาตร ) กวนให้เข้ากันเป็นเวลา 4 นาที ทำการทาด้วยลูกกลิ้งหรือ แปรงบนพื้นผิวที่เตรียมไว้ รอให้แห้งประมาณ 2-3 ชั่วโมงก่อนทาชั้นถัดมา

    วิธีการใช้งาน

    ใช้แปรงพลาสติกหรือลูกกลิ้งในการทา โดยทาลงบนพื้นผิวที่เตรียมไว้ ทาชั้นแรกและรอไว้ 1-2 ชั่วโมงก่อนทาชั้นที่สอง หลังจากทาเสร็จให้ปกป้องผิวจากน้ำหรือน้ำฝน ทิ้งไว้ 6 ชั่วโมงจึงสามารถเดินได้ วัสดุบ่มตัวเองใน 3 วัน

    ขนาดบรรจุ

    20 กิโลกรัมต่อถัง