ROCKMAX TOP200

ONE PART SKIM RENDER POWDER


INTRODUCTION

Rockmax TOP200 is a ready to use one part skim smooth surface rendering powder form. It can be applied both internal and external surfaces. Rockmax TOP200 provides a thin fairing surface over hairline crack, pinholes, air pocket, seams and minor defected surfaces.

AREA OF USES

  • Cast in place concrete surfaces.
  • Pre cast concrete surfaces.
  • Over rendering mortar surfaces.
  • All cementitious substrates.

    • ADVANTAGES

  • Good adhesion.
  • Can use both internal & external.
  • Easy to apply.
  • Good smooth & fine surface.
  • Can over paint.

    • APPLICATION AND INSTALLATION

    PREPARATION

    Concrete substrate must be clean and free from oil, grease, dust, particles, mould oil, curing compound. Soak water until concrete saturated.

    MIXING

    Mixer must use low speed drill mixer (500 rpm) with and including good quality steel paddle. Make sure all tools and equipments are in good conditions and clean. Measure 7.4 – 8.0litre of clean water for 20kg bag of Rockmax TOP200. Add material slowly into water while mixing. Mix continuous for approximate 3 minute until homogeneous. The mixing ratio could be adjusted according to user and environment conditions.

    APPLICATION

    Apply mortar by steel trowel. Multi layer could be applied.

    CURING

    Wait to dry for 7 days prior to paints.

    PACKAGING

    20kg bag.