ROCKMAX ROOFGARD

ELASTOMERIC MODIFIED BITUMEN LIQUID MEMBRANE


INTRODUCTION

Rockmax Roofgard is one part thixotropic dark brown bitumen emulsion cold applied liquid membrane. Use for general purpose waterproofing material. Good bonding many kind of substrate ie concrete, asbestos concrete, roof felt, timber, galvanized roof, metal and etc.

AREA OF USES

  • Roofs, gutters, walls.
  • Balconies.
  • Underground basements.
  • Damp-proofing.
  • External retaining wall.
  • ADVANTAGES

  • High elongation.
  • High elasticity.
  • Excellent crack bridging.
  • Excellent adhesion.
  • Easy to use.
  • Seamless waterproof.
  • Rust protection for galvanized and metal roofs.
  • Corrosion protection.
  • Can apply on old existing structure.
  • APPLICATION AND INSTALLATION

    PREPARATION

    Substrate must be sound, clean, free from oil, grease, mould oil, dust and loose particles. Ensure the surface is dry and free from water saturated.

    PRIMING

    Mixer must use low speed drill mixer (500 rpm) with and including good quality steel paddle. Make sure all tools and equipments are in good conditions and clean.

    Dilute Rockmax Roofgard with water at 1 (Rockmax Roofgard) : 1 (water) by volume. Stir 2 part together approximate 1-3 minute until homogenius. Prime the surface by brush or roller at coverage rate 0.5kg/m2. Allow the prime coat to dry before top coat application.

    APPLICATION

    Apply first coat of Rockmax Roofgard to the primed surface by brush or roller. Allow first coat to dry approximate 60-90 minute. Apply second coat and allow to dry. For watertight apply 2-3 coats. Allow to completely dry for 4-6 hours prior to light traffic

    CLEANING

    Clean all tools and equipments immediately with kerosene or solvent.

    PACKAGING

    18Kg pail.