ROCKMAX SUPERCOTE 5

WATER DISPERSED EPOXY COATING


INTRODUCTION

Rockmax Supercote 5 is a water dispersed two component epoxy resin coating system. Design for durable coating for walls and floors include can be applied on damp surface. Ideal for use as coating where solvent based material are not allowed.

AREA OF USES

  • Clean rooms.
  • Food processing plants.
  • Pharmaceutical plants.
  • Show rooms.
  • Garage and parking desks.
  • Tunnel segments.

    • ADVANTAGES

  • Chemical and abrasion resistance.
  • Mechanical resistance
  • Easy to clean.
  • Can apply on damp surface.
  • Non solvent and non toxic.
  • Environmental friendly.

    •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2. Pre wet surface if necessary.

    PRIMING

    Dilute Rockmax Supercote 5 with 10% clean water to help good penetration for concrete substrate. Apply by roller or brush and wait 24 hours until dry.

    MIXING

    Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).

    APPLICATION

    Apply by brush or roller on the prepared surface. Wait until dry 24 hours prior to apply second coat and third coat.

    CURING

    Protect applied area from foot traffic at approximate 24 hours and fully cure in 5 days.

    CLEANING

    Clean all tools and equipments immediately with clean water.

    PACKAGING

    20 kg set.