ROCKMAX ASP

WATER BASED EPOXY PRIMER FOR ANTI STATIC FLOOR


INTRODUCTION

Rockmax Supercote ASP is a water dispersed two component, low viscosity, epoxy primer. It use as primer for antistatic floor syste

AREA OF USES

Rockmax Supercote ASP use for priming concrete substrate prior to apply antistatic floor system.

ADVANTAGES

  • Low viscosity,
  • Good penetration to concrete substrate.
  • Good adhesion.
  • Easy to apply.
  • Water based product.

    •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2.

    MIXING

    Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).

    APPLICATION

    Apply by brush or roller on the prepared surface. Wait until dry 24 hours prior to apply body coat.

    CLEANING

    Clean all tools and equipments immediately with clean water.

    PACKAGING

    5 kg set.