INTRODUCTION
Rockmax Strip BR is a self adhesive sealing strip waterstop Non Swelling type. Its provide watertight for joints both cast in place concrete and precast concrete joints. Design to use for non moving joint only. Use in concrete structures wall to wall, wall to slab, slab to slab. There is no effect from rain, water and wet conditions which may occur during installation.
AREA OF USES
ADVANTAGES
APPLICATION AND INSTALLATION
PREPARATION
The surface of joints must be clean and free from dust, cement paste, mould oil, standing water and loose particles. Use wire brush to clean surfaces. Damaged concrete must be repair prior to install Rockmax Strip BR.
INSTALLATION
Rockmax Strip BR must be placed at center of the joints. Peel the protective paper of product strips. Press product firmly along the length of joint. Press approximate 30% to 50% of its original thickness to ensure watertight. Joining the strip by end to end. For vertical joint, Nail must be use for fixing.
PACKAGING
20mm x 15mm x 5meter