Rockmax Supercote P is two components solvent based epoxy clear primer and surface treatment to porous concrete.
AREA OF USES
Primer for Rockmax Supercote coating on concrete substrate walls and floors.
APPLICATION AND INSTALLATION
Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete moisture content must less than 4%.
Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).
Apply by brush or roller on the prepared surface.
Clean all tools and equipments immediately with acetone, xylene, thinner or solvent.
15 kg set.