ROCKMAX SUPERCOTE P

EPOXY PRIMER


INTRODUCTION

Rockmax Supercote P is two components solvent based epoxy clear primer and surface treatment to porous concrete.

AREA OF USES

Primer for Rockmax Supercote coating on concrete substrate walls and floors.

ADVANTAGES

  • Good penetration.
  • Good adhesion.
  • Low viscosity.
  •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete moisture content must less than 4%.

    MIXING

    Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).

    APPLICATION

    Apply by brush or roller on the prepared surface.

    CLEANING

    Clean all tools and equipments immediately with acetone, xylene, thinner or solvent.

    PACKAGING

    15 kg set.