ROCKMAX AQUATECH W

Silane-Siloxane Water Based Water Repellent


INTRODUCTION

Rockmax Aquatech W is a ready to use, water based, liquid applied, water repellent. It’s formulated from silane-siloxane polymer. The cured material act like sealer to the substrates and provides durability, water repellent and protect the appearance of surfaces. The material penetrates into the surface, forming a long lasting water repellent treatment that retards the penetration of these contaminants.

AREA OF USES

Rockmax Aquatech W can be used to many substrates include exposed concrete, cement mortars, masonries, bricks, tiles, natural stones, lime stones, slate, terracotta, clay tiles. It can be used also for re-waterproofing for finished tiles.

ADVANTAGES

  • Excellent water repellency.
  • Non-staining.
  • No film on surface.
  • UV resistance.
  • Excellent weather resistance.
  • Good penetration.
  • Non-toxic, water based.
  • Not change the surface appearance.
  • Long term effective.
  • Keep beautiful surfaces.
  • Easy to apply & ready to use.

    •  

    APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    The substrate must be dry, sound, clean and free from oil, grease, mould oil, curing compound, dust, loose particles and cement paste. No standing water on the surfaces. New concrete should be allowed to cure at minimum 21 days old. The new repair mortar must be waited at minimum 5 days before application.

    APPLICATION

    Stir the material until homogenous by electric low speed drill mixer. Apply Rockmax Aquatech W by roller or brush. Apply with a uniform saturation. Surfaces should remain wet for a few minutes. Water and oil repellency will start to develop within 24 hours and completely cure in 7 days. In case of porous substrates, we recommended to apply the second coat within 4 hours after first application

    PACKAGING

    5 litre.
    25 litre.
    200 litre.

    STORAGE

    Storage in shade and dry condition at 5-40ºC. Avoid from sunlight, frost, water, moisture and high temperature.