ROCKMAX SUPERCOTE 3

SOLVENT FREE EPOXY COATING


INTRODUCTION

Rockmax Supercote 3 is two components solvent free epoxy coating. Its design for medium chemical and mechanical resistance. When cured it formed Good texture finished, seamless and gloss.

AREA OF USES

  • Maintenance areas.
  • Processing plants.
  • Pump rooms.
  • Steel structures.
  • Industrial kitchens.
  • Warehouse and storage areas.
  • Mechanical and electrical rooms.

    • ADVANTAGES

  • Abrasion resistance.
  • Mechanical resistance
  • Chemical resistance.
  • Solvent free.
  • Seamless and smooth surface.
  • Easy to clean.

    •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum Compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete moisture content must less than 4%.

    PRIMING

    Apply Rockmax Supercote P prior to apply body coat. For steel structure, please contact Rockmax for further information.

    MIXING

    Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).

    APPLICATION

    Apply by brush or roller on the prepared surface. Wait until dry 24 hours prior to apply second coat.

    CURING

    Protect applied area from foot traffic at approximate 24 hours and fully cure in 7 days.

    CLEANING

    Clean all tools and equipments immediately with acetone, xylene, thinner or solvent.

    PACKAGING

    20 kg set