ROCKMAX PU54

SELF LEVELING POLYURETHANE FLOORING SYSTEM


INTRODUCTION

Rockmax PU54 is a 3 components polyurethane resin based, one layer, self leveling flooring system. It designed for high impact resistance, abrasion resistance and chemical resistance. Be able to achieve from 3-5mm thickness.

AREA OF USES

  • Drink and food production areas.
  • Beverage manufacturers.
  • Pharmaceutical factories.
  • Chemical processing plants.
  • Textile production areas.
  • Electronic manufacturers.
  • ADVANTAGES

  • Good chemical resistance.
  • Good abrasion and impact resistance.
  • Monolithic flooring system.
  • Resistance to thermal shock.
  • Easy maintenance.
  • Seamless.
  •  

    APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. The surface must be treated by mechanical means such as shot blasting, grinding, scrabbling or water jet for increase bonding between substrate and flooring system. Concrete must be at least 25N/mm2 Compressive strength and minimum tensile strength (pull off) at 1.5 N/mm2. The concrete surface must be visibly-dry no dark areas on concrete surface which excess moisture. The working ambient and surface temperature should not below 10ºC while installation. All movement joints must be prepared prior to installation flooring system. If moisture content in concrete higher than 4% Moisture Barrier must be applied. All grove joints must be prepared at 5mm width x 5mm depth around the edge, intersection, joints, drains, gutters and etc.

    APPLICATION

    Trained and approved specialist applicator was required to be installed this products.

    PACKAGING

    20 kg set.