ROCKMAX MB900

HIGH BUILD WATER DISPERSED EPOXY


INTRODUCTION

Rockmax MB900 is a two components water dispersed coating. Its designed for high build coating concrete walls and floors where solvent based is not allowed. Protection concrete surface against abrasion, chemical and hard wearing surface. Very suitable with hygienic industrial processing plants and can act as primer for Rockmax MB as moisture barrier purpose.

AREA OF USES

  • Food processing plants.
  • Pharmaceutical plants.
  • Beverage processing plants.
  • Hospitals.
  • Car park desks.
  • ADVANTAGES

  • Excellent adhesion to concrete.
  • Good abrasion resistance.
  • Good chemical resistance.
  • High build coating.
  • Non solvent.
  • Compatible with cement based materials.
  • Low sensitive with moisture.
  • Water based material.
  • APPLICATION AND INSTALLATION

    PREPARATION

    Concrete must be sound, clean and free from cement paste, dust, dirt and any other contaminants. Concrete must be at least 28 days and minimum compressive strength 25N/mm2 and minimum tensile strength (pull off) at 1.5 N/mm2. All floors to received total enclosed shot blasting or scarifying should be employed followed by vacuuming.

    MIXING

    Mix part A and part B approximate 3 minutes until homogeneous using electric mixer (400-500 rpm).

    APPLICATION

    Apply by brush or roller on the prepared surface. Wait until dry 24 hours prior to apply second coat and third coat.

    In very rough and porous concrete, part C could be reduce to achieve more liquid slurry to better flow and penetration.

    CLEANING

    Clean all tools and equipments immediately with water.

    PACKAGING

    5 kg set.