INTRODUCTION
Loxet 600 is an alkali free liquid set accelerator admixture. It’s especially design for shotcrete application.
AREA OF USES
Loxet 600 can be used for sprayable concrete application including with tunneling, rock support, soil stabilization, mining support, pool constructions.
ADVANTAGES
APPLICATION AND INSTALLATION
DOSAGE
The consumption of Loxet 600 depends on many factors such as temperature, type of aggregates, cement content, age of cement, thickness per layer, method of spraying, equipment, accurate of nozzle, setting time, design strength, etc. We recommended the dosage of Loxet 600 in between 3% to 10%. The optimum dosage must be determined by trial on site with control conditions. Overdosing (>10%) may result in decrease of ultimate strength.
COMPATIBILITY
Loxet 600 is compatible with all type of ordinary portland cement. We recommended to used fresh cement than aged cement as there may have some effect on setting time. Loxet 600 is compatible with all Rockmax admixture products. Do not mix Loxet 600 with any type of accelerator produced by other manufacturer.
APPLICATION
Loxet 600 must be added in the nozzle and injected by pump with adjustable pressure type (No filter on nozzle head). We strongly advise that w/c ratio must be lower than 0.45 and should be use conjunction with our superplasticiser admixture for improve smooth pumping.
CLEANING
All equipment, pump, hose, nozzle, etc must be truly clean with plenty of water.
PACKAGING
200 Litre PE type drum.
Do not store material in steel containers. The container must be sealed to avoid evaporation