Water Repellant

 

ROCKMAX CERAMIC V2
ROCKMAX LATEX
LIQUIED APPLIED ELASTOMERIC & HEAT REFLECTIVE CERAMIC WATERPROOF

 

INTRODUCTION

Rockmax Ceramic V2 is a high performance waterborne acrylic binder with and including air encapsulated ceramic microspheres which provide excellent heat reflection. The benefits also include excellent waterproofing, cost saving and reduce temperature inside the building. By using the coating, customers can efficiently stabilize proc esses, protect personnel and maintain product levels. Its designed for both spray and roller coating method.

AREA OF USES


Rockmax Ceramic V2 can used for the following flat exposed concrete roof, concrete gutter, steel gutter , fa├žade , external concrete wall, roof metal sheet, steel tank , silos , electrical and mechanical room, area required control
temperature.


ADVANTAGES


  • Excellent heat reflective >80%.
  • Reduce temperature in building.
  • Excellent bonding.
  • Crack bridging ability.
  • Excellent elongation.
  • UV resistance.
  • Non yellowing.
  • Value engineering to building.
  • Reduce cost of air condition.
  • Reduce thermal shock.
  • Prevent rust and corrosion.
  • Long life span 10-15 years.
  • Easy application one part.
  • Can apply by spray.
  • Nice appearance.

  •  

    APPLICATION AND INSTALLATION


    PREPARATION

    Concrete substrate must be sound, clean, free from oil, grease, mould oil, dust, loose particles, cement past and. Ensure the surface is dry and free from standing water. The moisture content in concrete substrate must be check with limit not more than 5% moisture contents. If moisture contents in concrete higher than 5% Moisture Barrier must be apply. Check and investigate void, honeycomb, or crack on concrete substrate. All damaged must be repair prior to application. All joints and corner must be treated with Rockmax PUseal. Others substrate such as metal, steel should be consult Rockmax for more information.


    PRIMING

    Rockmax Ceramic V2 can dilute with water and apply as first prime coat (20% thin with water). Apply prime coat by brush or spray to the whole area.


    APPLICATION

    Mixer must use low speed drill mixer (500 rpm) with and including good quality steel paddle. Make sure all tools and equipments are in good conditions and clean. Stir Rockmax Ceramic V2 by mixer at approximate 30 second until see homogeneous. Apply First coat of Rockmax Ceramic V2 by roller. Allow the first coat to dry at 2 hours before next coat. Apply second and third coat to achieve design thickness (DFT). Follow first coat application.

    Airless spray:
    In case of spray method. Thin 10% with clean water for easy working properties.


    CURING

    Protect Rockmax Ceramic V2 by plastic sheet from rain and water. Rockmax Ceramic V2 is self curing and curing time is approximate 5-7 days prior to open to traffic.

    PACKAGING

    23Kg pail.

    STORAGE

    Storage in shade and dry condition. Avoid from frost, water, UV, moisture and high temperature.