Water Repellant

 

ROCKMAX EB545
ROCKMAX LATEX
2 COMPONENT EPOXY BONDING AGENT

 

INTRODUCTION

Rockmax EB545 is a solvent free, 2 component epoxy bonding agent. The cured material provides high bonding strength between old substrate and new topping material. It is also used in area where critical bonding strength is required.

AREA OF USES

Rockmax EB545 can used to bond between cement mortar to old concrete substrate, between steel plate and concrete, between repair mortar and dama ged concrete substrate or any other
applications please consult
Rockmax for advice.

ADVANTAGES


  • Good adhesion.
  • Can use both internal & external.
  • Easy to apply.
  • Good smooth & fine surface.
  • Can over paint.

  •  

    APPLICATION AND INSTALLATION


    PREPARATION

    Concrete substrate must be clean and free from oil, grease, dust, particles, mould oil, curing compound. Remove all loose material and laitance by mechanical means. New concrete must be at least 21 days old. When working with high temperature, please consult Rockmax for recommendation.


    MIXING

    Mix part A and part B at 2-3 minute by low speed electric drill. Mix until the material homogeneous and uniform color. Do not mix by hand trowel.


    APPLICATION

    Apply the material direct to substrate by brush. Pour or patch new material such as topping mortar, repair mortar, screed while Rockmax EB545 still wet and tacky. If the bonding agent is dry. It is recommended to apply new layer of bonding agent.

    PACKAGING

    4kg set;
    part A: 4 kg
    part B:2 kg

    STORAGE

    Storage in shade and dry condition Avoid from frost, water, moisture and high temperature.