ROCKMAX AQUATECH S
SILANE-SILOXANE SOLVENT BASE WATER REPELLENT

 

INTRODUCTION

Rockmax Aquatech S is a ready to use, solvent base, breathable, liquid applied, high performance water repellent sealer. The treated surfaces have a totally natural appearance. The small molecule of material penetrates into the pore and capillaries of surfaces results in stop intrusion of water, salt, acid, oil, alkaline, chemical. Treatment of reinforced concrete surface reduces surface erosion and corrosion of rebar caused by water and salt water.

AREA OF USES


Rockmax Aquatech S can be used to variety of concrete structures ie highways, bridges, stadiums, concrete ramps, brick walls, precast-concrete, tunnels and any material has dense surfaces such as stone.


ADVANTAGES


  • Maximum long term protection.
  • External use.
  • Expand life of concrete.
  • No film on surface.
  • UV resistance.
  • Excellent weather resistance.
  • Good penetration.
  • Can apply on damp surface.
  • Easy to apply & ready to use.

  •  

    APPLICATION AND INSTALLATION


    SURFACE PREPARATION

    The substrate must be dry, sound, clean free from oil, grease, mould oil, curing compound, dust, and loose particles and cement paste. New concrete should be allowed to cure at minimum 21 days old. The repair mortar must be waited at minimum 5 days before application.


    APPLICATION

    Stir the material until homogenous by electric low speed drill mixer. Do not stir by hand. Apply Rockmax Aquatech S by roller or brush. Apply with a uniform saturation. Surfaces should remain wet for a few minutes. Water and oil repellency will start to develop within 24 hours and completely cure in 7 days. In case of porous substrates, we recommended to apply the second coat within 2 hours after first application.

    PACKAGING

    5 litre.
    25 litre.
    200 litre.

    STORAGE

    Storage in shade and dry condition at 5-40ÂșC. Avoid from sunlight, frost, water, moisture and high temperature.