Maxshield 150W is a cold applied self adhesive bituminous membranes. It is manufactured and formulated from modified SBS bitumen and high performance adhesive layer. This selected materials made very easy to installation. It is supplied in rolls 1meter width x 15meter long and 1.5mm thickness.
AREA OF USES
APPLICATION AND INSTALLATION
Concrete substrate must be sound, smooth, clean, dry and free from loose materials, oil, grease or any other contaminants. In case of substrate has moisture on surface use flame torch to dry up surface prior to apply primer.
Apply Maxshield Primer on prepared substrate at approximate coverage rate 5m2 per litre and allow to dry.
Maxshield 150W should be applied from lowest point. All joints, angles and end points must be overlap at minimum 75mm. Internal and external corners should be reinforced with 300mm membrane strip. End laps should be sealed. Ensure the membrane is perfectly stick and adhere with concrete substrate and no air pockets. It is recommended to protect the membrane by protection boards immediately. Do not exposed the membrane to direct UV for long period. Maxshield 150W must be installed by experiences, trained and approved applicators.
Roll size: 1meter x 15meter.
Roll weight: approx 25kg.