ROCKMAX STRIP BR

NON SWELLING WATERSTOP


INTRODUCTION

Rockmax Strip BR is a self adhesive sealing strip waterstop Non Swelling type. Its provide watertight for joints both cast in place concrete and precast concrete joints. Design to use for non moving joint only. Use in concrete structures wall to wall, wall to slab, slab to slab. There is no effect from rain, water and wet conditions which may occur during installation.

AREA OF USES

  • Basements, Retaining Walls.
  • Diaphragm walls.
  • Water tanks, Waste water tanks.
  • Swimming pools.
  • Precast concrete structures.
  • Culverts and Channels.
  • Reservoirs.
  • ADVANTAGES

  • Good bonding to many substrates.
  • Easy to install.
  • Unaffected by rain and water.
  • Unaffected by wet and dry cycle.
  • No crack cause from swelling type.
  • Safe for portable water tanks.
  • Adhesion to wood, glass, metal aluminiums.
  • APPLICATION AND INSTALLATION

    PREPARATION

    The surface of joints must be clean and free from dust, cement paste, mould oil, standing water and loose particles. Use wire brush to clean surfaces. Damaged concrete must be repair prior to install Rockmax Strip BR.

    INSTALLATION

    Rockmax Strip BR must be placed at center of the joints. Peel the protective paper of product strips. Press product firmly along the length of joint. Press approximate 30% to 50% of its original thickness to ensure watertight. Joining the strip by end to end. For vertical joint, Nail must be use for fixing.

    PACKAGING

    20mm x 15mm x 5meter

    ROCKMAX HYDROSTOP CJ

    ยางบวมน้ำชนิดยางคลอโรพรีน


    *คลิกเพื่อดูภาพขยาย

    ข้อมูลเบื้องต้น

    Rockmax Hydrostop CJ คือวัสดุวอเตอร์สตอปสำหรับรอยต่อคอนกรีตโดยมีส่วนประกอบของวัสดุหลักเป็นยางสังเคราะห์กับสารผสมเพิ่ม ชนิดพิเศษ สามารถใช้งานได้กับรอยต่อคอนกรีตหล่อในที่ รอยต่อชิ้นส่วนคอนกรีตสำเร็จรูปทั่วๆไป และรอยต่อชิ้นส่วนคอนกรีตสำเร็จรูปสำหรับ งานก่อสร้างอุโมงค์ใต้ดิน หลักการทำงานตัววัสดุจะขยายตัวในอัตราประมาณ 200% เมื่อสัมผัสกับน้ำหรือความชื้น โดยตัววัสดุจะคงรูปเดิมและ ไม่แตกตัวขณะบวมตัวหรือขยายตัว

    ลักษณะการใช้งาน

  • รอยต่อชิ้นส่วนคอนกรีตสำเร็จรูปงานก่อสร้างอุโมงค์
  • รอยต่อชิ้นส่วนสำเร็จรูปสำหรับงานก่อสร้างทั่วไป
  • รอยต่อระหว่างท่อพลาสติกและคอนกรีต
  • รอยต่อเข็มผืดคอนกรีต
  • รอยต่อท่อส่งน้ำ
  • รอยต่อกำแพงกันดิน
  • รอยต่อถังเก็บน้ำ
  • คุณสมบัติ

  • อุดรอยต่อโดยการขยายตัว
  • มีความแข็ง และทนทาน
  • มีอัตราการขยายตัวสูง
  • สามารถทนแรงดันน้ำได้สูง
  • ใช้ได้กับรอยต่อที่ไม่เคลื่อนตัวเท่านั้น
  • ใช้กับถังน้ำดีได้
  • สามารถผลิตตามแบบที่ต้องการได้
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    พื้นผิวคอนกรีตต้องสะอาด ไม่มีฝุ่น ผงซีเมนต์ น้ำมัน หรือน้ำยาทาแบบตกค้าง กรณีของรอยต่อคอนกรีตแบบหล่อในที่ควรทำร่องแนวตามรอยต่อ เพื่อง่ายต่อการติดตั้ง โดยทำแบบไว้บริเวณกึ่งกลางของรอยต่อโดยมีระยะห่างจากขอบวอเตอร์สตอปถึงขอบคอนกรีตประมาณ 50 มิลลิเมตร กรณีรอยต่อชิ้นส่วนสำเร็จรูป โดยมากจะมีร่องเว้นไว้ ให้ทำความสะอาดคราบน้ำมันที่ตกค้างอยู่


    วิธีการใช้งาน

    ติดตั้งตัววัสดุตามแนวร่องที่ได้เตรียมไว้ โดยต้องมีระยะห่างจากขอบถึงขอบอย่างน้อย 50 มิลลิเมตร สามารถใช้ตะปูคอนกรีตยึดเป็นระยะ ๆ ได้ กรณีของรอยต่อชิ้นส่วนคอนกรีตสำเร็จรูปแนะนำให้ใช้กาวยางทาก่อนที่จะติดตั้ง การเชื่อมต่อใช้การต่อแบบหัวชนท้ายเท่านั้น

    ขนาดบรรจุ

    ขนาด 20mm x 10mm x 10meter
    1 กล่อง บรรจุ 50 เมตร

    ROCKMAX SWELLING 201

    SWELLING SEALANT IN CARTRIDGE


    Click image to enlarge

    INTRODUCTION

    Rockmax Swelling 201 is a gun applied, single component, hydro reactive expansion sealant use for all kinds of construction joints and pipe penetrations in concrete

    AREA OF USES

    Rockmax Swelling 201 can be used for seal and watertight all kinds of construction joints in concrete, pipe penetrations, seal between precast concrete elements, H-beam penetration, king posts, rough surface construction joints, use as secondary protection for PVC waterbars, crack sealing.

    ADVANTAGES

  • Excellent swelling rate.
  • Elasticity.
  • Can apply on damp surfaces.
  • Good adhesion to concrete, steel, glass,PVC, HDPE.
  • Can apply on rough/irregular surfaces.
  • Durability.
  • Easy to apply by gun.
  • APPLICATION AND INSTALLATION

    SURFACE PREPARATION

    The joint surface must be clean, dry and free from dust, loose particles, oil, curing compound. No standing water on the joint surface.

    APPLICATION

    Cut the plastic nozzle as per required thickness and profile. The size of sealing material is depended on the thickness of concrete joint. Apply the material continuous so there is no break in the joint. Allow 4-8 hours before pour concrete.

    PACKAGING

    300ml cartridge.

    ROCKMAX SWELLING 101

    ยางบวมน้ำชนิดเบนโทไนท์



    *คลิกเพื่อดูภาพขยาย

    ข้อมูลเบื้องต้น

    Rockmax Swelling 101 คือยางบวมน้ำชนิดเบนโทไนท์ใช้งานสำหรับรอยต่อคอนกรีต หลักการคือจะสามารถขยายตัวเพื่ออุดโพรงที่เกิดขึ้น บริเวณรอยต่อโครงสร้างคอนกรีต (construction joint) เมื่อสัมผัสกับน้ำหรือความชื้น มีส่วนประกอบหลักคือเบนโทไนท์ ยาง และสารผสมเพิ่ม โดยจะบวมหรือขยายตัวเมื่อสัมผัสกับน้ำหรือความชื้น มีอัตราการขยายตัวประมาณ 300% ใช้ได้ดีกับรอยต่อคอนกรีตชนิดที่ไม่เคลื่อนตัวเท่านั้น

    ลักษณะการใช้งาน

  • ใช้กับรอยต่อคอนกรีตชนิดไม่เคลื่อนตัวเท่านั้น
  • รอยต่อถังเก็บน้ำและถังบำบัดน้ำเสีย
  • รอยต่อภายในงานก่อสร้างอุโมงค์ใต้ดิน
  • รอยต่อผนังและพื้นใต้ดิน
  • รอยต่อผนังกันดิน
  • รอยต่อระหว่างท่อพลาสติกกับพื้นหรือผนังคอนกรีต
  • รอยต่อเข็มพืดคอนกรีต
  • รอยต่อคอนกรีตสำเร็จรูป
  • รอยต่อเสาเข็มกับฐานราก
  • คุณสมบัติ

  • สามารถทนแรงดันน้ำได้สูง
  • ใช้ได้กับถังเก็บน้ำดี
  • ติดตั้งง่ายและสะดวกในการเชื่อมต่อ
  • ติดตั้งได้รวดเร็ว
  • มีความคงทน
  • ประหยัดค่าใช้จ่าย
  • ขนส่งสะดวก
  • ไม่มีสารพิษอันตราย
  • ไม่ทำให้คอนกรีตร้าวเมื่อเกิดการขยายตัว
  • วิธีการติดตั้งและใช้งาน

    การเตรียมพื้นผิว

    พื้นผิวคอนกรีตต้องสะอาด ไม่มีฝุ่น ผงซีเมนต์ น้ำมัน น้ำยาทาแบบ สนิมเหล็กและอื่นๆ ต้องทำการล้างทำความสะอาดด้วยน้ำบริเวณที่จะทำการติดตั้ง ใช้แปรงลวดขัดพื้นผิวให้สะอาด ในกรณีที่พื้นผิวคอนกรีตมีความเสียหายต้องทำการซ่อมแซมก่อนการติดตั้ง

    วิธีการใช้งาน

    หลังจากเตรียมพื้นผิวเรียบร้อยแล้ว ก็ทำการติดตั้งโดยลอกเทปที่ปิดหุ้มอยู่ออก ทำการติดตั้งวัสดุตามแนวรอยต่อคอนกรีต ติดตั้งให้มีระยะห่าง ระหว่างผิวคอนกรีตถึงผิววอเตอร์สตอปประมาณ 80 มิลลิเมตรเป็นอย่างน้อย ใช้มือกดให้ผิววัสดุแนบกับรอยต่อ ใช้ตะปูตอกคอนกรีตในการยึด โดยมีระยะห่างประมาณ 50 เซนติมเตร เมื่อต้องทำการต่อให้ใช้วิธีการต่อแบบหัวชนท้าย ไม่ควรต่อแบบทาบ ในกรณีที่ติดตั้งในแนวตั้ง ระยะระหว่างตะปูให้ใช้ประมาณ 30 เซนติเมตร กรณีฝนตกขณะติดตั้งให้หาพลาสติกมาคลุมทันที

    ขนาดบรรจุ

    25mm x 20mm x 5meter (30meter/box)

    footer address

    Our Address

    Rockmax Company Limited
    455/176 Jaransanitwong Road,
    Bangkhunsri, Bangkok noi,
    Bangkok THAILAND

    Contact Rockmax

    Sales & Marketing – Email: export.rockmax@gmail.com

    Sales Domestic- Email: rockmaxth@gmail.com

    General- Email: info@rockmax.net

    Mobile- +66 86 813 9621 | +66 80 260 4613

    Telephone- +66 2 864 8658

    Fax- +66 2 4184327

    LINE ID: rockmax99

    LINE ID: orlanmax

    SKYPE: orlando_max

    linkedin Call Now Email

    Floor Preparation Guide

    Rockmax presents this information based upon industry technical bulletins and many years of experience with flooring systems. This document is offered purely as a guideline and, since no two floors are alike, each one must be evaluated for its particular needs. The cost of surface preparation far outweighs the cost of the materials for the flooring system and therefore, it is extremely important to evaluate the substrate properly.

    CONCRETE ADMIXTURE

    We focus on special products for concrete admixture use in many areas ready mixed concrete plants , precast concrete factories and special projects such as roller compacted concrete dam , high rise building construction , hot weather environment construction. Our products include new generation hyperplasticiser based on polycarboxylate raw materials , high range water reducing, mid range water reducing and retarding and etc.